The usage of Bricks or Pavers to produce a sidewalk or outdoor patio matches a home in a way that is unmatched. In addition, setting up a Brick or Paver pathway does not necessarily need a pro.
The secret to installing a Brick or Paver Walkway is to very first appropriately prepare the area where the bricks/pavers are to be installed. The location must be dug out a minimum of a foot down, getting rid of all topsoil and clay soil. In addition, string lines should be strung on each side of the walkway. The string lines show the finished height of the sidewalk.
As soon as the location has been dug down, 3/4" gravel stone must be laid in and tamped down tightly. The height between the tamped down sand and the stringline should equal the density of the brick or paver.
Now that you have a steady base, position a 1" pipe or ledger board the length of the pathway on either side of the sidewalk. Then using a flatedge, e.g. a 2"x4" board, slide it over the two lengths of the pipe/ledger board. In doing this you will develop a level area to lay the bricks/pavers.
Now put on the level sand/stone dust strips of plastic brick borders. Set up an operate on both sides of the prepared area. These strips will function as your walkway border and assistance to maintain the integrity and shape of the walkway. You can get these plastic strip borders at many house enhancement stores. The strips should be anchored down with 12" galvinized nails. You need to sink these nails into the ground and through the strips every foot.
Once this is done, you can then begin to lay the bricks/pavers. There are many patterns you can lay. I particularly like the Herring Bone pattern. The secret to laying the bricks/pavers is to ensure that they interlock with each other. Constantly stagger nearby rows of bricks by 1/2 of a brick to interlock them. This will once again assist keep the stability of the sidewalk.
Inevitably bricks/pavers will need to be cut or divided when constructing the walkway. To website really cut/split the brick/paver, lay it in a bed of sand and place the chisel at a 75 degree angle over the spot where you want to break the brick. If your walkway has curves you will require to buy/rent a wetsaw.
After setting up the bricks, construct up the outside edges with extra sand, and then shovel in the topsoil and pack down strongly.
Spread stone dust over the new walkway and sweep into the fractures. Repeat this procedure website a couple of times to make sure the fractures are fully filled. This will complete the interlocking of the bricks and assist to remove any weed growth. Just include lawn seed to the outside edges and you need to have a beautiful entryway to your home within a number of weeks.
In addition, installing a Brick or Paver sidewalk does not necessarily need a pro. The secret to installing a Brick or Paver Walkway is to first properly prepare the area where the bricks/pavers are to be set up. Now that you have a stable base, put a 1" pipeline or ledger board the length of the pathway big grey bricks on either side of the sidewalk. These strips will act as your walkway border and assistance to maintain the integrity and shape of the sidewalk. Undoubtedly bricks/pavers will need to be cut or split when constructing the walkway.